AboutContactRSS
KardyPhoto
Photography

White Balance Explained: Getting Natural Colours Straight From the Camera

· November 21, 2026 · 4 min read

Have you ever taken a photo indoors and found everything glowing orange, or shot in the shade and ended up with a cold blue cast? That is white balance at work, or rather not at work. Getting it right gives you natural-looking skin tones, clean whites and less time correcting colour later. The concept is simple once you see how light behaves.

What White Balance Does

Different light sources have different colour temperatures. Candlelight is warm and orange, midday sun is fairly neutral, and open shade or an overcast sky leans blue. Our brains adjust automatically so a white shirt looks white in all of them. Cameras need help. White balance tells the camera what “white” should look like under the current light so the other colours fall into place.

Colour temperature is measured in Kelvin. Lower numbers mean warmer, orange light, and higher numbers mean cooler, bluer light. You do not need to memorise exact values, but knowing that tungsten bulbs sit low, daylight sits in the middle and shade sits high helps you predict what will happen.

The Common Presets

  • Auto (AWB): the camera guesses. It works surprisingly well in daylight but can wobble under mixed lighting.
  • Daylight or Sunny: for bright outdoor conditions.
  • Cloudy: adds warmth to counteract the cool cast of overcast skies.
  • Shade: adds even more warmth for shadowed areas.
  • Tungsten or Incandescent: cools the image to balance orange household bulbs.
  • Fluorescent: corrects the greenish tinge of some tube lights.
  • Flash: balanced for the colour of a typical flash unit.
  • Custom or Kelvin: you set a precise value or measure it from a grey card.

Using a Grey Card or White Reference

For the most accurate colour, photograph a neutral grey or white card in the same light as your subject, then use the camera’s custom white balance function to set it. In editing software, you can also click on the grey area with the white balance picker to correct a whole set of images at once. This is especially useful for product photos, interiors and events.

Shoot in RAW for Flexibility

When you shoot RAW files, white balance is stored as a setting rather than baked into the pixels, so you can change it later without quality loss. JPEG files lock in more of the look, and large corrections can introduce banding or odd tones. If you shoot JPEG, aim to get it right at capture.

Mixed Lighting Problems

A room with window light and warm lamps contains two colour temperatures at once. No single setting will make both look neutral. Options include:

  • Switching off one source so only one type remains.
  • Choosing to favour the area that matters most, such as the face of your subject.
  • Embracing the contrast, because a warm lamp against cool window light can look cosy and cinematic.
  • Using flash or a continuous light to dominate the scene.

Creative Use of White Balance

White balance is not just a correction tool. You can shift it deliberately to change the mood. A slightly warm setting makes sunsets and portraits feel golden, while a cooler setting can give landscapes a crisp, wintery feel. Try shooting the same scene at several settings and compare the results to learn how each influences the story you want to tell.

A Practical Routine

  • Start with Auto and check a few frames on the screen.
  • If colours look off, choose the preset that matches the light.
  • Take a test shot of a neutral object if accuracy matters.
  • Keep the same setting across a series so editing is easier.
  • Review a few images on a calibrated screen if you plan to print.

Common Mistakes

  • Leaving a tungsten setting on after moving outdoors, which leaves photos very blue.
  • Relying on the back-of-camera screen in bright light, which can mislead your sense of colour.
  • Over-correcting skin tones until they look grey.
  • Forgetting that your screen brightness and colour settings affect how images look.

With a little practice you will recognise colour casts instantly and know how to fix them in seconds.

Checking Your Work Later

When you sit down to edit, compare a few frames side by side. If one shot in a series looks warmer than the next, the camera probably adjusted automatically between frames. Locking a manual setting for the whole shoot avoids this problem and makes batch editing much quicker.

It also helps to keep a neutral object, such as a grey card or a plain white sheet of paper, in the first frame of each new location. That single reference photo gives you an easy anchor when you correct the rest of the set.

Frequently Asked Questions

Should I always use auto white balance?

It is a good default for casual shooting, but manual or custom settings give more consistent results when lighting is tricky or you are shooting a series.

Why do my photos look different on my phone and my computer?

Screens vary in brightness and colour accuracy. Calibrating your monitor and checking images on more than one device helps you judge them.

What is the best white balance for sunsets?

There is no single best setting. Many photographers prefer Cloudy or Shade for a warmer, richer look, but experiment and decide what matches your memory of the scene.

trang chủ on68
Đăng ký tài khoản